|
|
|
|
|
|
|
|
|
|
|
MRV Connectivity
This section provides the Adapter pinouts to connect MRV Terminal Servers to the most common connect points.
NOTE: |
Conventional Standards (which are loosely complied) state:
Female connectors DB9, DB25, V.35 34 pin etc. present DCE wiring and the opposite male connector presents DTE wiring.
OEM specifications should always be checked for correct pinning, if none are available use proper test equipment such as a breakout box to determine pinning.
|
Juniper ERX, E320, NSMExpress |
CBM Cable Part#: CBLG2112-XXX |
RJ45 | | DB9 F |
CTS | 1 | ---- | 7 | RTS |
DTR | 2 | ---- | 1,6 | DCD/DSR |
XMT | 3 | ---- | 2 | RCV |
GND | 4,5 | ---- | 5 | GND |
| | | | |
RCV | 6 | ---- | 3 | XMT |
DCD | 7 | ---- | 4 | DTR |
RTS | 8 | ---- | 8 | CTS |
|
|
Juniper M40 74-0495-01 (Cisco) |
CBM Cable Part#: CBLG2113-XXX |
RJ45 | | DB9 F |
CTS | 1 | ---- | 7 | RTS |
DTR | 2 | ---- | 4 | DSR |
XMT | 3 | ---- | 3 | RCV |
GND | 4,5 | ---- | 5 | GND |
| | | | |
RCV | 6 | ---- | 2 | XMT |
DCD | 7 | ---- | 6 | DTR |
RTS | 8 | ---- | 8 | CTS |
|
All SSG and ISG Models Netscreen 25,50,2xx,5xxx |
CBM Cable Part#: CBLG2109-XXX/ADPG2109 |
RJ45 | | RJ45 |
CTS | 1 | | 8 | RTS |
DTR | 2 | | 7 | DSR |
XMT | 3 | | 6 | RCV |
GND | 4 | | 5 | GND |
GND | 5 | | 4 | GND |
RCV | 6 | | 3 | XMT |
DCD | 7 | | 2 | DTR |
RTS | 8 | | 1 | CTS |
|
|
|
|
|
|
|