|
|
|
|
|
|
|
|
|
|
|
|
MRV Connectivity
This section provides the Adapter pinouts to connect MRV Terminal Servers to the most common connect points.
| NOTE: |
Conventional Standards (which are loosely complied) state:
Female connectors DB9, DB25, V.35 34 pin etc. present DCE wiring and the opposite male connector presents DTE wiring.
OEM specifications should always be checked for correct pinning, if none are available use proper test equipment such as a breakout box to determine pinning.
|
|
Cisco Catalyst 5000
29-0810-01 (Cisco) |
|---|
CBM Cable Part#: CBLG2108-XXX |
RJ45 | | DB25 M |
|---|
CTS | 1 | ---- | 4 | RTS |
DTR | 2 | ---- | 20 | DTR |
XMT | 3 | ---- | 2 | RCV |
GND | 4,5 | ---- | 7 | GND |
| | | | |
RCV | 6 | ---- | 3 | XMT |
DCD | 7 | ---- | 6 | DSR |
RTS | 8 | ---- | 5 | CTS |
|
|
Cisco 12000, 3725, 2950, 26xx
Supervisor Engine II, II-Plus, III, and V (RJ45) |
|---|
CBM Cable Part#: CBLG2109-XXX |
RJ45 | | RJ45 |
|---|
CTS | 1 | | 8 | RTS |
DTR | 2 | | 7 | DSR |
XMT | 3 | | 6 | RCV |
GND | 4 | | 5 | GND |
GND | 5 | | 4 | GND |
RCV | 6 | | 3 | XMT |
DCD | 7 | | 2 | DTR |
RTS | 8 | | 1 | CTS |
|
|
Cisco 3512 |
|---|
CBM Cable Part#: CBLG2110-XXX |
RJ45 | | RJ45 |
|---|
CTS,DTR | 1,2 | ---- | 7,8 | |
| | ---- | | |
XMT | 3 | ---- | 6 | RCV |
GND | 4 | ---- | 5 | GND |
GND | 5 | | 4 | GND |
RCV | 6 | ---- | 3 | XMT |
DCD | 7 | ---- | 2 | DTR |
RTS | 8 | ---- | 1 | CTS |
|
|
Cisco 3550 |
|---|
CBM Cable Part#: CBLG2111-XXX |
RJ45 | | DB9 F |
|---|
CTS | 1 | ---- | 8 | RTS |
DTR | 2 | ---- | 6 | DSR |
XMT | 3 | ---- | 2 | RCV |
GND | 4,5 | ---- | 5 | GND |
| | | | |
RCV | 6 | ---- | 3 | XMT |
DCD | 7 | ---- | 4 | DTR |
RTS | 8 | ---- | 7 | CTS |
|
|
|
|
|
